Can I mount the FORM charger on my golf cart?

If you choose to do so, the charger may be mounted to your cart. Below you will find the steps to complete the installation.

Step 1: Remove the rubber feet from the bottom of the charger.

Step 2: Find a suitable location on the golf cart and mount it using the appropriate hardware. (Example Locations: baggage well, Battery compartment, Bottom of the Seat) 

Step 3: Using your charger as a template, hold the charger against the surface you plan to mount to and mark the holes. The mounting locations on the charger are shown here.

Step 4: Set the charger aside and predrill holes on marked locations

Step 5: Align the charger with the predrilled holes. Secure with screws.

INSTALLING ON THE ONBOARD CHARGER (Onboard Specific Charger)

Step 1: Switch the golf cart to TOW mode

Step 2: Find a suitable location on the golf cart and mount it using the appropriate hardware. (Example Locations: baggage well, Battery compartment, Bottom of the Seat)
Step 3: Find the ends of the electrical series on your cart batteries. Attach the Red lead (Marked with Red heat Shrink) to the battery Positive (+). Attach the Black lead (marked with Black Heat Shrink) to the battery Negative (-). Applying Dielectric grease around the connections will help prevent corrosion.

Step 4: Switch the golf cart to RUN mode